|
||||||||||||
| |||||||||||||
|
|
Heated Dual Tour for
Call 1-800-743-3110 to Order a Corbin Seat
|
|
1-800-743-3110 Exotic Harley is NOT associated with HARLEY-DAVIDSON MOTOR COMPANY, Harley-Davidson Motor Co., Inc., H-D Michigan, Inc, HARLEY-DAVIDSON®, HARLEY®, V-ROD®, or any other motorcycle manufacturer. HARLEY-DAVIDSON MOTOR COMPANY w/Bar & Shield Design and logos are registered trademarks of HARLEY-DAVIDSON MOTOR COMPANY. Harley-Davidson Motor Co., Inc. All pictures and references to the Harley name, or any motorcycle manufacturers, and the bike names and shapes are used for reference only. Exotic Harley does NOT sell any parts manufactured by HARLEY-DAVIDSON MOTOR COMPANY®. Exotic Harley only sells aftermarket parts and accessories for Harley-Davidson® Motorcycles. © 2008 Exotic Racing All Rights Reserved. Exotic Racing |
Cart
& Checkout
An exercise in
versatility and customizing options for your Screaming Eagle bagger. This new
design Dual Touring Saddle provides you and a passenger with sculpted seating
and long range comfort with the luxurious addition of electric seating heaters.
Generously contoured seating platforms provide better weight distribution to
eliminate pressure points and give long range support that fits your body. A
range of setup options are available for the wide variety of accessories that
can be used on this bike model. This is the perfect saddle setup for touring
quality comfort on your FLHTCSE. 
Designed to work with
two removable rider backrests as shown above or in conjunction with one of the
Tourpaks available from Harley-Davidson. We offer two different truck pads for
this setup depending on how much back support you want for your passenger. The
touring pad with arms shown here gives your copilot maximum support and comfort.
This works especially well on the larger Tourpak. Click on the image off to the
side to also view our thin trunkpad that provides a very clean, low profile look
and still gives reasonable support. If you're using the low profile Tourpak
(commonly called the Pizza box) this is a great solution! 
Both the rider and
passenger areas accept a removable backrest. Each backrest is fully adjustable
for a tailored fit to rider posture. Use a single backrest and transfer it front
to rear as needed or you can order two backrests for full time use in your
saddle. Corbin backrests lock in with a single screw and can be adjusted without
removing them from the seat. In the front we have engineered the backrest to
fold down to make it easier to mount the bike. Corbin's backrest hardware is
spring loaded to make the rest pop back upright after you throw your leg over.
This special hardware (internal to the saddle) also allows the backrest position
fore and aft to be adjusted to your profile. This enables the backrest to be
completely customized to fit your riding posture. 
If you're leaning
towards a luggage rack rather than the Tourpak, we also happen to make a
coordinated pad to fit. Naturally if you use a setup like this, the Chrome
V-Rail cannot be installed on the saddle at the same time. If you're luggage
rack is a "detachable" model, you can always transfer your rider's backrest into
the passenger position when the rack is removed from the bike. This allows you
to change the look of your bike quickly and easily. Corbin's luggage rack pad is
ergonomically sculpted, just like our backrests to provide excellent support
without hot spots. Mounts on your luggage rack like the stock pad. 
Corbin's Dual Touring
saddle is available for standard FLH and FLT models as well, but this one is
designed specifically for the CVO Screaming Eagle model Electra-Glide.
Harley-Davidson refers to this model as the FLHTCSE. The largest difference
between our standard Dual Tour seat model and this one is the fit to the chrome
tank panel that comes on the Screaming Eagle model. The nose area of the saddle
has been redesigned to match up perfectly with it as you can see here. For other
FLH/FLT models, please click HERE. 
For the ultimate in
luxury, we have built electric seat heaters into our Dual Touring saddle design.
A single switch controls the heat for both the rider and passenger positions.
The switch is conveniently located along the left side of the saddle so you can
reach it without taking your hand off the throttle. The two position switch
allows you to select a heat level depending on conditions. The level of heat is
controlled automatically by a thermostat built into the control unit. Controller
and thermostat come preinstalled on the saddle so installation is a snap. 
Corbin's Dual Touring
Saddle also accepts our chrome "V-rail" for an added nostalgic touch, (but not
if you are using a Tourpak or Luggage rack). Show quality chrome plating
provides a nice touch of class. V-rail mounts directly to the Corbin saddle for
simple installation that does not require drilling or brackets. Of course, we
use genuine leather in all of our seat models to provide a luxurious ride that
breathes with your body. Leather will break in along with your foam shape to
give you a personalized fit and will age gracefully with proper care. Take good
care of your leather seat with a quality conditioner like Corbin's Saddle Cream.
Your seat will look nice for years and show character just like your leather
jacket. 
Foam density is an
important factor in long range comfort and we always say... "Firm is a good
thing". Corbin uses a very unique formula of purpose built materials in the
manufacturing process. Combine this with the years of design experience and you
have the world's finest motorcycle seat. Comfort Cell®
foam combined with our patented molding process deliver unmatched contoured
support. Corbin saddles feel firm when you first ride on them, but will break in
and adapt to your body and support you in comfort for years to come. Enjoy the
ride! 
On High, the
heater will attain a surface temperature of 107 degrees in roughly 10
minutes. The temperature is then tightly controlled and will cycle between
105-107 degrees for one hour. After one hour it is shut off by an internal
timer. The heater can be reset for another hour of operation by moving the
switch to the OFF position and then back to ON. 
Installation:
The Corbin Dual Touring Saddle installs on your bike like stock using a
tongue in the front and a single screw into your fender at the rear. Chrome
V-Rail bolts directly to the saddle and doesn't require any outside brackets
for installation... very clean! 
Seat
heater assembly comes preinstalled on the saddle and ready to go. We supply
the wiring pigtail and adapter to connect the seat directly into your stock
Harley fusebox. This is a simple procedure that can be handled by any home
mechanic.