Home
Exhaust
Seats
Engines
Sissy Bar
Gas Tanks
Saddlebags
Fenders
Wheels Tires & Brakes
Accessories (General)

Corbin Seat

Corbin Hollywood Solo
2002 - 2003 Harley Davidson V-Rod VRSCA

Corbin's Hollywood Solo saddle design is engineered to keep a low profile on your bike while providing good comfort value. We've designed a sculpted riding platform that creates a greater area of body contact, therefore dispersing your weight better... it's a simple matter of geometry really. We call this "ergonomic shaping" and it's one of the things that puts Corbin designs head and shoulders over the other guys. Naturally, we design the saddle to support your weight more from the outside and take away centralized pressure points. To give you longer range support, the saddle is built up with our exclusive Comfort Cell foam that provides approximately 50-70 percent more support than the stock foam. Additionally, we've lowered the seating bucket to put you in a more natural riding position and provide a better center of gravity.

Naturally we didn't ignore your need to carry passengers, so we made a cool pillion pad that matches up with your Hollywood Solo and carries the slick line back over the fender. Built up with the same high density foam used in the solo, our pillion offers your passenger a much more supportive ride than the stock seat. Although we've kept the profile low, the Corbin design still provides good riding comfort. Please note we have two models of pillion pad that work with the Hollywood Solo, one works with the Harley-Davidson luggage rack installed, the other is designed to work without it. The Corbin Wizards designed our pillion mounting system around the electrics (rather than over them) to allow a deeper bucket up front which relieves the tailbone pressure associated with the stock seat.

 Both the Hollywood Solo and matching passenger pillion include genuine leather seating in your choice of colors and styles. We use leather to provide a perch that breathes with your body and will break in along with the foam shape to provide a personalized fit. Over time your saddle will conform to your body and develop a unique character in fit and appearance. That's one of the great things about a quality leather seat. You can help your leather saddle remain supple and weather resistant by treating it well with a quality conditioner like our Saddle Cream. Your Corbin saddle will be your riding buddy for years.

Hollywood Solo and Pillion mount easily on your V-rod with brackets included and pre-installed on the saddle. The hinging action of your seat remains to provide access to the fuel tank. See complete installation information below.

Special Notes and Info Rider Seating: 13" wide x 14" long Passenger: 9.5" wide x 10" long Approx. seat height: 26.5" NOTE: Corbin Hollywood Solo and Pillion does NOT work with the stock Harley-Davidson components. The Pillion must be ordered to allow the Solo seat to install properly. Installation: Hollywood Solo installs on your V-Rod like stock with hinge and latch bracket included. Remove your stock front seat according to your owners manual and install the Corbin saddle in it's place. You will need to transfer the seat hinge cable from the OEM unit (very important). Remember to turn the key and gently latch your seat as recommended by Harley, slamming the seat down could break the tab! Pillion installation: Remove the stock rear seat from your bike according to your owners manual. Corbin's pillion seat slips onto the rear fender bracket like stock and is bolted down under the front solo using the original bolt. That's it, you're done. Note: Two pillion pad models are available for your V-Rod. If you have the V-Rod Luggage rack or just the chrome plate for the luggage rack you need part #HD-VR-HP-RACK. If you don't have the luggage rack AND you don't have the chrome plate for the luggage rack then you need part #HD-VR-HP.

Call 1-800-743-3110 to Order a Corbin Seat

FXFF-Mini-FL | Fairing | Dual Tour | Hollywood Solo | Beetle Bags | Young Guns

1-800-743-3110

Sales@Harley-Part.com

www.Harley-Part.com

Exotic Harley is NOT associated with HARLEY-DAVIDSON MOTOR COMPANY, Harley-Davidson Motor Co., Inc., H-D Michigan, Inc,  HARLEY-DAVIDSON®, HARLEY®, V-ROD®, or any other motorcycle manufacturer. HARLEY-DAVIDSON MOTOR COMPANY w/Bar & Shield Design and logos are registered trademarks of HARLEY-DAVIDSON MOTOR COMPANY.  Harley-Davidson Motor Co., Inc.  All pictures and references to the Harley name, or any motorcycle manufacturers, and the bike names and shapes are used for reference only.  Exotic Harley does NOT sell any parts manufactured by HARLEY-DAVIDSON MOTOR COMPANY®.  Exotic Harley only sells aftermarket parts and accessories for Harley-Davidson® Motorcycles.

© 2008 Exotic Racing All Rights Reserved. Exotic Racing