SANTEE 2 1/4" 'Snub Nose' Exhaust Pipes - 21/4" maximum coverage heat shields are matched with our high-flowing 13/4" inner pipes for an unbeatable combination of looks, sound and performance. Each pipe is constructed of heavy-duty 16-gauge steel and includes heavy-duty mounting brackets, chrome end caps and baffles to complete the package. Like all Santee pipes these beauties are backed with a TWO YEAR WARRANTY on materials and workmanship.

SANTEE 2 1/2" 'Snub Nose' Exhaust Pipes - Subtle as a nuclear blast — these pipes rock! Featuring 2"-dia-meter pipes with fat 21/2" maximum coverage heat shields for a huge look that keeps your pipes looking new and virtually eliminates blueing. Each set is constructed of heavy-duty 16-gauge steel

SANTEE 2 1/2" 'Snub Nose' RSD Exhaust Pipes - These pipes feature 21/2" full-coverage heat shields for a huge look that keeps your pipes looking new, and virtually eliminates blueing. They were designed to be used in conjunction with wide tire applications where a right side drive transmission is needed. We built these pipes to last, so they are constructed of heavy-duty 16-gauge steel and include integral baffles, heavy-duty mounting brackets, and chrome turn-out end caps. Like all Santee® pipes these beauties are backed by a TWO YEAR WARRANTY* on materials and workmanship.

SANTEE 2 1/4" Drag Pipes for Touring Models - Go BIG with ‘225’s from Santee®! Huge 21/4"-diameter pipes deliver wicked sound and all the performance you can handle. Made from 16-gauge seamless tubing and now featuring a FULL TWO YEAR WARRANTY* on materials and workmanship. The ‘Crossover’ system has

SANTEE Designer Series 'Y-Pipes' by John Reed - Created by master designer john reed to make a statement and make it with authority. Available in 13/4" and 2" with a tasty show chrome finish. Unless your neighbors are bikers too, you’re going to ruffle some feathers with these pipes!

SANTEE Designer Series 'BOA' - Created with 2" pipe the beautifully polished and chromed the BOA is a lethal combination of performance and style. Backed by our full TWO YEAR WARRANTY and shipped with necessary hardware. For Softail models 1986 to present.

SANTEE 'Lake Pipes' - She purrs like a kitten till the Lake Pipes roar (Beach Boys)! Styled after the classic Street-Rod side pipes, they must be seen and heard to be believed. • 2" head pipes constructed of 16-gauge steel • Choice of 2 outlet lengths

SANTEE Designer Series 'Skirt Blowers' Exhaust by Paul Yaffe Originals - The latest and sickest pipe design from the mind of Paul Yaffe. Straight up in your face styling with a multi-piece heat shield design that will totally set your bike apart from the crowd. Includes a set of velocity stack exhaust tips for a race-ready, all-business look.

Donnie Smith Signature Series 'Big Mama' Pipes - 21/4" pipes featuring vertical slash cut tips which accent the angle of the swingarm. This unique set of show-chromed pipes provides a sleek custom look. Manufactured of heavy 16 gauge steel tubing, precision bent on computer controlled equipment and hand checked to ensure a perfect fit.

SANTEE Designer Series 'Venom Pipes' by Big Bear Choppers - These 2" pipe sets are constructed of 14-gauge seamless tubing and feature extreme slash cut tips. They come complete with mounting brackets and feature Santee’s world famous Two Year Warranty.

SANTEE 'S-Style' 2 1/4" Staggered Slash-Cut Drag Pipes - Go BIG with ‘225’s from Santee®! Huge 21/4"-diameter pipes deliver wicked sound and all the performance you can handle. Made from 16 gauge seamless tubing and now featuring a FULL TWO YEAR WARRANTY* on materials and workmanship.

SANTEE 1 3/4" Slash Cut Drag Pipes - Santee® drag pipes are made of 16 gauge steel with hidden channel mounts that connect to your stock brackets, or to supplied brackets unless otherwise noted. Like all Santee® pipes they are covered by the best warranty in the business, TWO FULL YEARS on materials and workmanship.

SANTEE 1 3/4" Straight Cut Drag Pipes - Designed to clear factory fiberglass saddlebags or rear highway bars, these 13/4" drag pipes are available in either straight cut or kick out versions to fit 4-speed FL’s with kick or electric start. The rear pipe is an under-the-transmission style for a tucked in look. Each set includes a chrome mounting bracket. Made in USA by the Santee crew.

SANTEE S-Style 1 3/4" Slash-Cut Drag Pipes - These slick looking drags have an ‘S’ shaped rear pipe that crosses the transmission stacked above the front pipe. They’re constructed of 16-gauge steel and feature flawless chrome plating. Each set uses hidden channel mounts and includes an innovative chrome-plated exhaust bracket that replaces the tubular Original Equipment part. Santee® pipes are covered by our unmatched TWO YEAR WARRANTY on materials and workmanship.

SANTEE 1 3/4" Shotgun Drag Pipes- Classically styled high quality Shotgun Drags are made of 16 gauge steel with beautiful chrome plating, great bends and hot performance. Features our unbeatable FULLTWOYEARWARRANTYon materials and workmanship and includes all necessary brackets and hardware unless otherwise noted. Optional baffles may be used if a quieter exhaust note is desired.

SANTEE Drag Pipes - Clear all Original Equipment footpeg and control positions and provide superior fit with excellent ground clearance. Complete with concealed channel-mounts, chrome mounting bracket, exhaust port gaskets, sockethead exhaust port screws with lockwashers, and installation instructions. Optional baffles may be installed when a quieter exhaust note is desired.

SANTEE 2-Into-1 Headpipes - Modeled after the early-style 2-into-1 exhaust systems, the two separate front and rear 13/4" headers are joined with a tooled slip-fit connection for a snug, leak-resistant seal that requires no external clamping. This pipe set allows you to build a custom system and includes a muffler clamp and mounting bracket. Provides generous ground clearance and won’t interfere with Original Equipment floorboards, controls, footpegs or saddlebags. See custom mufflers for this 2-into-1 pipe set.

SANTEE 1 3/4" & 2" Drags - These 40"-long Dyno Power drag pipes, available in either 13/4’ or 2" diameter fit XL’s 1957 thru 1985. The smooth, bracketless pipes may be mounted using "P"-clamps or with the universal chrome exhaust mounting brackets listed. Baffles may be installed when a quieter exhaust note is desired. 1980 and later models require Brake Pedal Stop sold separately. Made in USA by Santee.

 40" long drag pipe set has an inside-the-frame front pipe that fits with factory floorboards and forward-mounted master cylinder. The under-the-transmission rear pipe clears the large battery, factory safety bars and saddle bags. Easily mounted using optional 'P'-clamps. Floorboard models require an optional Floorboard Adaptor

SANTEE 1 3/4" Upswept Drag Pipes - These 13/4" upswept drag pipes fit 1971 thru 1984 FX Models, and are reminiscent of the ‘chopper’ pipes from the 60s. Available two ways; ‘Kick-Out’ style with a slick turned out look, or for real nostalgia choose the ‘Trim-Tail’ system. Chrome mounting bracket and hardware is included. Dyno Power® pipes feature smooth, even mandrel bends and fully polished, high quality chrome plating. Made in USA by the crew at Santee.

SANTEE 2 1/2" Slip On Mufflers - These low-restriction mufflers are avail-able in two popular styles. They feature all-steel muffler cores and high-quality chrome-plating. Available to fit most bikes, they add great looks and improve sound and performance. Sold in sets.

SANTEE Fishtail Straight Pipes - A set of un-baffled, 30" long Fishtail straight pipes with 13/4"-inlets. Made in USA by Santee. Sold in pairs

SANTEE Baffled Fishtail Extensions - These 36"-long universal Fishtail extensions can be easily added to existing 13/4"-diameter headpipes.

SANTEE Chrome Original Equipment-Style Mounting Brackets - These American-made chrome brackets are accurate reproductions of the Original Equipment parts fitted to many models since 1980.

SANTEE Chrome Exhaust Heat Shield - 7" chrome-plated heat shield for all 13/4" diameter exhaust pipes. A unique integrated clamp mounts this shield for a neat custom appearance.

SANTEE Universal Perforated Exhaust Heat Shield - Chrome-plated 11"-long universal heat shield fits a range of pipe and muffler sizes from 13/4" to 3". Ideal for Shotgun or upswept exhaust systems.

SANTEE Universal Exhaust Pipe Heat Shield - 7"-long universal heat shield fits a range of pipe sizes from 11/2" to 2". Ideal for protection on Shotgun or upswept systems.

SANTEE Floorboard Adaptor - Required for use when installing some Santee® exhaust systems on 4-speed FL models equipped with floorboards. When properly installed, it provides additional clearance between the front pipe and the right floorboard.

SANTEE T-Bolts  - Replacement T-bolts for all Dyno Power® exhaust systems.

SANTEE Drag Pipe Mounting Brackets - Designed for strength and easy mounting, these brackets will ensure secure mounting with the lean look that drag pipes are known for.

Call 1-800-743-3110 to Order a Santee Exhaust