|
||||||||||||
| |||||||||||||
|
|
Stinger saddle for
Call 1-800-743-3110 to Order a Corbin Seat
|
|
1-800-743-3110 Exotic Harley is NOT associated with HARLEY-DAVIDSON MOTOR COMPANY, Harley-Davidson Motor Co., Inc., H-D Michigan, Inc, HARLEY-DAVIDSON®, HARLEY®, V-ROD®, or any other motorcycle manufacturer. HARLEY-DAVIDSON MOTOR COMPANY w/Bar & Shield Design and logos are registered trademarks of HARLEY-DAVIDSON MOTOR COMPANY. Harley-Davidson Motor Co., Inc. All pictures and references to the Harley name, or any motorcycle manufacturers, and the bike names and shapes are used for reference only. Exotic Harley does NOT sell any parts manufactured by HARLEY-DAVIDSON MOTOR COMPANY®. Exotic Harley only sells aftermarket parts and accessories for Harley-Davidson® Motorcycles. © 2008 Exotic Racing All Rights Reserved. Exotic Racing |
Cart
& Checkout
A very cool solo option
for your Screaming Eagle bagger. Corbin's Stinger seat design offers excellent
rider support and a sleek fastback tail section that hugs the fender. We've
designed the seating area ergonomically to provide more square inches of body
contact for proper weight distribution. This helps to eliminate hot spots and
give you long lasting support in the saddle. Bucket design of the saddle sits
you down into the chassis for better balance and a more natural riding position
on the bike. Corbin's built up tail section looks cool and provides good back
support to the rider... especially when combined with our removable rider's
backrest. 
Stinger is designed to
work with any of the removable backrest models available from Corbin for added
back support. We prefer the model #02-G shown here for a good combination of
support and slick looks. The Corbin backrest is supported by internal hardware
so there are no unsightly brackets to clutter up the look of your machine.
Installation is simple with a single set-screw under the saddle locking the
backrest in place. Naturally, the backrest angle can be adjusted to your profile
quickly and easily without removing the saddle from the bike. With the #02-G
backrest in place, this saddle model offers nearly 14 inches of vertical back
support! 
Designed to work in
conjunction with one of the Tourpaks available from Harley-Davidson if you
choose. We offer two different truck pads for this setup depending on how much
back support you want for your passenger. Shown here is our slim line trunk pad
mounted up to the low profile Tourpak (commonly called the Pizza Box). This
model is contoured to fit your passenger's back and offer good support even with
its thin profile. This model works on the regular and low profile Tourpak and
installs easily by drilling four holes in your trunk lid. Of course it comes
coordinated to your Corbin saddle with a full range of genuine leather options.
The Touring Pad with
arms shown here gives your copilot maximum support with the Harley-Davidson
Tourpak. This model works especially well on the larger model as shown. Again,
the Stinger saddle model is designed mostly as a solo model, so don't expect
passengers to be happy on the back for long regardless of the backrest options
you provide. Our Stinger saddle also works with the luggage rack / Sissy bar
available from HD for the bagger models. We offer a contoured pad to work with
that combination as well (not shown). Luggage rack pad is ergonomically
contoured for good back support without hot spots and mounts to the luggage rack
like the stock pad for simple installation. 
Corbin's Stinger saddle
is available for standard FLH and FLT models as well, but this one is designed
specifically for the CVO Screaming Eagle model Electra-Glide. Harley-Davidson
refers to this model as the FLHTCSE. The largest difference between our standard
Stinger seat model and this one is the fit to the chrome tank panel that comes
on the Screaming Eagle model. The nose area of the saddle has been redesigned to
match up perfectly with it as you can see here. For other FLH/FLT models, please
click HERE. 
Of course, we use
genuine leather in all of our seat models to provide a luxurious ride that
breathes with your body. Leather will break in along with your foam shape to
give you a personalized fit and will age gracefully with proper care. We have a
range of leather options to provide a custom look for your bike. In the model
shown, we've used Black Faux Baby-Alligator seating, Black Faux-Snake sides and
Black Faux-Shark tail. Be sure to take good care of your leather seat with a
quality conditioner like Corbin's Saddle Cream. Your seat will look nice for
years and show character just like your leather jacket. Stinger model uses a new
key lock mounting system available exclusively from Corbin. Read more about it
in the Special Notes box below. 
Foam density is an
important factor in long range comfort and we always say... "Firm is a good
thing". Corbin uses a very unique formula of purpose built materials in the
manufacturing process. Combine this with the years of design experience and you
have the world's finest motorcycle seat. Comfort Cell®
foam combined with our patented molding process deliver unmatched contoured
support. Corbin saddles feel firm when you first ride on them, but will break in
and adapt to your body and support you in comfort for years to come. Enjoy the
ride!
Installation:
Saddle installs using a new key latch system. Install the included latch pin
into your fender in place of the stock screw. Slip the tongue of the saddle
(at the front) into your chassis as you would with the stock seat
installation. Then simply lower the rear of the saddle onto the latch pin
while turning the key. Release the key and assure saddle is properly latched
to pin. To remove saddle, just turn the key to release the lock and remove
the saddle... Simple!